7-40 package dimensions
ltl-307r/307re red ltl-307p/307pe bright red ltl-307e/307ee high efficiency red ltl-307g/307ge green ltl-307y/307ye y ellow features high intensity. popular t-1 3 / 4 diameter package. selected minimum intensities. wide viewing angle. general purpose leads. reliable and rugged. description the red source color devices are made with gallium arsenide phosphide on gallium aresnide red light emit- ting diode. the bright red source color devices are made with gallium phosphide on gallium phosphide red light emit- ting diode. the high efficiency red and orange source color de- vices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. the green source color devices are made with gallium phosphide on gallium phosphide greenlight emitting diode. the yellow source color devices are made with gallium arsenide phosphide on gallium phosphide yellow light emitting diode. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25mm (.010") unless otherwise noted. 3. protruded resin under flange is 1.5mm (.059") max. 4. lead spacing is measured where the leads emerge from the package. 5. specifications are subject to change without notice. devices 307r 307re 307p 307pe 307e 307ee 307g 307ge 307y 307ye red diffused red transparent red diffused red transparent red diffused red transparent green diffused green transparent yellow diffused yellowtransparent part no. ltl- lens source color red bright red hi. eff. red green yellow l307r.p65 2000/7/11, wJ 10:04 page 40 adobe pagemaker 6.5c/win
7-41 through hole lamps lead soldering temperature [1.6mm (.063 in.) from body] 260 for 5 seconds absolute maximum ratings at ta=25 parameter power dissipation 80 200 40 0.5 5 -55 to +100 -55 to +100 continuous forward current derating linear from 50 reverse voltage operating temperature range storage temperature range peak forward current (1/10 duty cycle, 0.1ms pulse width) red bright red green y ellow hi. eff. red unit 40 60 15 0.2 5 100 120 30 0.4 5 60 80 20 0.25 5 100 120 30 0.4 5 mw ma ma ma/ v
7-42 electrical/optical characteristics at ta=25 parameter luminous intensity viewing angle peak emission wavelength dominant wavelength spectral line half width forward voltage reverse current capacitance symbol typ. min. max. mcd test condition. i v 2 p d v f i r c 307r 307p 307e 307g 307y note 2 (fig.7) i f =10 ma note 1,4 note 3 measurement @peak (fig.1) v r =5v i f =20ma v f =0 , f=1mhz unit. part no. ltl- 307x 307r 307p 307e 307g 307y 307r 307p 307e 307g 307y 307r 307p 307e 307g 307y 307r 307p 307e 307g 307y 307x 307r 307p 307e 307g 307y 0.5 1.7 5.6 5.6 8.7 1.7 5.6 19 19 29 655 697 635 565 585 50 651 657 623 569 588 24 90 40 30 35 1.7 2.1 2.0 2.1 2.1 30 55 20 35 15 2.0 2.6 2.6 2.6 2.6 100 deg nm nm nm v a pf notes:1.luminous intensity is measured with a light sensor and filter combination that approximates the cie eye- response curve. 2. is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3.the dominant wavelength, d is derived from the cie chromaticity diagram and represents the single wavelength which defines the color of the device. 4.i v needs 15% additionary for guaranteed limits. l307r.p65 2000/7/11, wJ 10:04 page 42 adobe pagemaker 6.5c/win
7-43 through hole lamps electrical/optical characteristics at ta=25 parameter luminous intensity viewing angle peak emission wavelength dominant wavelength spectral line half width forward voltage reverse current capacitance symbol typ. min. max. mcd test condition. i v 2 p d v f i r c 307re 307pe 307ee 307ge 307ye note 2 (fig.15) i f =10 ma note 1,4 note 3 measurement @peak (fig.1) v r =5v i f =20ma v f =0 , f=1mhz unit. part no. ltl- 307xe 307re 307pe 307ee 307ge 307ye 307re 307pe 307ee 307ge 307ye 307re 307pe 307ee 307ge 307ye 307re 307pe 307ee 307ge 307ye 307xe 307re 307pe 307ee 307ge 307ye 1.1 2.5 29 19 12.6 3.7 8.7 90 60 40 655 697 635 565 585 40 651 657 623 569 588 24 90 40 30 35 1.7 2.1 2.0 2.1 2.1 30 55 20 35 15 2.0 2.6 2.6 2.6 2.6 100 deg nm nm nm v a pf notes:1.luminous intensity is measured with a light sensor and filter combination that approximates the cie eye- response curve. 2. is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3.the dominant wavelength, d is derived from the cie chromaticity diagram and represents the single wavelength which defines the color of the device. 4.i v needs 15% additionary for guaranteed limits.
7-44 typical electrical/optical characteristic curves (25 ambient temperature unless otherwise noted)
7-45 through hole lamps typical electrical/optical characteristic curves (25 ambient temperature unless otherwise noted)
|
